Fire Rated Steel Doors

Fire Rated Steel Frames
  • Steel Frames are formed from Hot dipped galvanized steel as per ASTM A653 in various sheet thicknesses up to 3mm.
  • Frame Construction as per ANSI/UL63 Standards and meets the requirements of UL10B & UL10C.
  • Corner welded Frame with smooth finishing.
  • Optional knock-down frames with secured interlocking system.
  • Three sided or four-sided frames with or without transom panels.
  • Reinforced to receive all kinds of Hardware’s such as Hinges, strikes, closer Arms, Electric controls and more.
  • Fabricated to suit the wall jambs up to 300mm or more.
  • Fire Label up to 120mins.
  • Factory grey primer or polyester powder coated.
  • Supplied with Fixing Accessories.
fire-rated-doors
Fire Rated Steel Doors - Honey Comb Doors
  • Economical.
  • Impact resistant
  • Interior or exterior usage
  • Standard 45mm thick leaf
  • Standard 45mm thick leaf hexa cells for maximum strength, Rigidity and flatness
  • 18-gauge steel standard
  • 16-gauge or 14-gauge steel optional
  • G90 galvanized steel optional
  • Rust inhibitive prime coat
  • 18-gauge top and bottom inverted channels
  • Spot welded to face sheets
  • Continuously welded vertical - edges (seamless) standard 1˝ Honeycomb cells permanently bonded to both face sheets. Impact resistance - 45 PSI crushing strength of honeycomb Fire
  • Label Available
fire-rated
Fire Rated Steel Doors - Rock Wool Core Door
  • Moderate to high frequency usage
  • Building security
  • Standard 45mm thick door leaf and 50mm as an option
  • 18-gauge steel standard
  • 16-gauge or 14-gauge steel optional
  • G90 galvanized steel optional
  • 22-gauge channels spot welded to the sheet
  • 20- and 18- Gauge also available
  • Rust inhibitive prime coat
  • 18-gauge top and bottom inverted channels
  • Spot welded to face sheets
  • Continuously welded vertical - edges (seamless) standard
fire-steel-door
Hardware Reinforcements
  • 4.5mm for Hinges
  • 3mm for Locks
  • 2mm for Closers